ACE FMC-150-HYD-206

• The High Performance Pump: 88 GPM at 100 PSI
• Provides for higher pressure and greater volume for applications with large tanks and longer spray booms
• The 206 motor requires 7 GPM hydraulic fluid input and fits virtually all tractor hydraulic systems

Recommended for:

     -Pressure compensating closed systems
     -Load sensing closed center systems
     -Open center systems up to 16 GPM using        internal needle valve bypass

:: More Product Info ::

ACE FMC-200-HYD-304

304 motor requires 11 GPM (41.6 LPM) maximum hydraulic fluid input
Ideal for spraying, large tank agitation, liquid transfer, and spray - transfer combinations

Recommended for:

• Pressure Compensating Closed Center Systems
• Load Sensing Closed Center Systems
• Open Center Systems up to 20 GPM
  (75.7 LPM) using internal needle valve bypass

:: More Product Info ::

ACE FLANGED FMC-200F-HYD-304

F Model equipped with industry standard flanged connections
Ideal for spraying, large tank agitation, liquid transfer, and spray - transfer combinations

Advantages:

• Quick installation
• Easy disassembly for service or replacement
• Optimized flow passages for improved performance and efficiency
• Improved performance – oversize suction flange allows use of 3” suction line
• Reduces assembly time and labor cost

:: More Product Info ::

ACE FMC-HYD-204
ACE FMC-HYD-210

204 motor requires 4 GPM(15.1 LPM) maximum hydraulic fluid input

Recommended for:

• Pressure Compensating Closed Center Systems
• Open Center Systems up to 13 GPM(49.2 LPM) using internal needle valve bypass

210 motor requires 10 GPM (37.9 LPM) maximum hydraulic fluid input

Recommended for:

• Load Sensing Closed Center Systems
• Open Center Systems up to 17 GPM (64.4 LPM) using internal needle valve bypass

:: More Product Info ::

ACE PTOC-150-600
ACE PTOC-150-1000

• The High Performance Pump. 40 GPM at 100 PSI due to increased pulley ratio and larger 1 1/2" x 1 1/4" construction
• Provides higher pressure and greater volume for applications with large tanks and long spray booms
• Allows fuel savings by operating at lower engine speeds and still maintains adequate spraying pressures

:: More Product Info ::

BANJO CAST IRON PUMPS

• Cast iron construction for rugged dependable service
• Carbon ceramic seal with stainless steel cup and spring with Viton rubber
• Replaceable inlet and outlet flanges
• Dynamic balanced impeller

:: More Product Info ::

BANJO CENTRIFUGAL PUMPS

• Cast iron construction for rugged dependable service
• Stainless steel short sleeve to protect engine shaft
• Carbon ceramic seal with stainless steel cup and spring with Viton rubber
• Replaceable inlet and outlet flanges
• Dynamic balanced impeller

:: More Product Info ::

BANJO PEDESTAL PUMPS

With the addition of the Banjo bearing pedestal, the pump is easily adaptable to an electric motor.

:: More Product Info ::

BANJO POLYPROPYLENE PUMPS

• Pump end separated from engine
• Heavy duty slinger seal on shaft
• Large weep holes between pump
  and engine
• High strength polypropylene
• Corrosion resistant
• Lightweight - Portable
• High performance impellers

:: More Product Info ::