Valves, Fittings, and Nozzles

Agro-Chem Inc. carries a broad range of valves and fittings from Banjo, a leading producer of mechanical and electrical products. We also have nozzles from TeeJet, a world leader in spray application and precision farming technology.

Valves and Fitting

Banjo Ball Valves

  • Stainless steel bolts
  • Precision molded in polypropylene; polypropylene is reinforced with fiberglass for additional strength
  • Self-aligning ball moves freely against the Teflon® seats for smooth operation; the valve opens and closes with very little pressure on the handle
  • Ball is diamond turned, after molding, to make it spherically perfect, which provides precise contact between ball and seats
  • Viton "O" ring stem seal
  • Teflon® self-lubricating stem bushings and seats cannot stick or bind

Banjo Stubby Valves

Banjo EV100

Banjo Manifold Fittings
1" - 3" Flange with 3/4" - 3" Hose Barb

Banjo Polypropylene Cam Lever Couplings

Banjo Polypropylene Pipe Fittings

Banjo Stainless Steel Hose Barbs

  • 316 S.S. precision castings
  • Hex flats
  • Combination sizes
  • 1/4" to 3"

Precision Polypropylene Fittings

  • Male taper threads and hose barbs
  • Elbows: Male taper by hose barbs
  • Hose menders
  • Elbows: Hose barbs by hose barbs
  • Female threads by slip on hose

TeeJet 344 Series Electric Shutoff Valves

  • 25 RPM, 0.6 second shutoff fully open to close
  • Flexible inlet/outlets provide quick simple plumbing for a single valve
  • Available in two-way or three-way versions; two-way valves allow complete shutoff while the three-way valves divert flow to a bypass line when boom controls are shut off
  • Stainless steel stem with optional polypropylene or stainless steel ball
  • Maximum pressure rating is 300 psi (20 bar)
  • The flow rate for the 344BEC two-way valve is 32 gpm (121 l/min) with a 5 psi (0.34 bar) pressure drop
  • The flow rate for the 344BEC three-way valve is 24 gpm (91 l/min) with a 5 psi (0.34 bar) pressure drop
  • Wetted parts are nylon, Teflon®, polypropylene, stainless steel, and Viton®

TeeJet 440 Series Shutoff Manifold
The 440BEC series DirectoValve manifold provides a convenient, compact solution for the installation of multiple 344BEC electric ball valves. This system eliminates the need for custom fabrication of pipe or hose manifolds, drastically reducing both installation time and the chance for fluid leaks.

TeeJet 450 Series Shutoff Manifold

Nozzles

 

XP Boomjet
Boomless Flat Spray Nozzles

  • Excellent spray distribution over a wide range of pressures: 15-60 psi (1-4 bar)
  • Ideal for rigs equipped with sprayer controllers
  • Reduces drift at lower pressures, better coverage at higher pressures
  • Available in stainless steel, ceramic, and polymer in 80º and 110º spray angles with VisiFlo color-coding
  • Ceramic is available with corrosive-resistant polypropylene VisiFlo colo-coded tip holder in 80º capacities 03-08 and 110º capacities 02-08
  • Brass available in 110º only
  • Automatic spray alignment with 25612-*-NYR Quick TeeJet cap and gasket
  • Automatic spray alignment for sizes 10 and 15 with 25610-*-NYR Quick TeeJet cap and gasket

You can be assured of superior quality that is backed by a manufacturer’s warranty.
Call us at 800-686-5680 to find out more about our products.